The main purpose of multiplayer blow moulding machine is to unravel the required trend that use of bound material alone cannot reach product of the condensation physical properties (such as heat resistance, air tightness and mechanical strength, etc.) needs. This machine specially appropriate for high-barrier chemical bottle of production, the utmost volume of the merchandise is one metric capacity unit. Single, double and triple die heads square measure all out there, and therefore the components of die heads square measure made up of steel.


  • Category: Special Extrusion Blow Molding Machine

Description

The main purpose of multiplayer blow moulding machine is to unravel the required trend that use of bound material alone cannot reach product of the condensation physical properties (such as heat resistance, air tightness and mechanical strength, etc.) needs. This machine specially appropriate for high-barrier chemical bottle of production, the utmost volume of the merchandise is one metric capacity unit. Single, double and triple die heads square measure all out there, and therefore the components of die heads square measure made up of steel.

Model Specification:

Model

Screw dia. (mm)

Plasticizing Capacity (KG/H)

Clamping force (KN)

Max. Volume of Product (L)

HW50R-III

50/30/30

50/8/8

50

1

HW60R-III

60/35/35

80/10/10

80

2.5

HW70R-III

70/40/40

110

100

3.5

 

HW50R-III Specification

1. Max. volume of product……………………1L

2. Extrusion system

Screw diameter(outer/middle/inner)……………………50/30/30mm

Screw L/D……………………27:1/25:1/25:1

Plasticizing Capacity……………………50/8/8kg/h

Barrel heating zones……………………3/3/3

Motor power……………………15/4/4kw

3. Clamping system

Platen dimension(W×H)……………………315×350mm

Clamping force……………………50kn

Mold platen opening stroke……………………80-330mm

4. Pneumatic system

Air supply pressure……………………0.7mpa

Work pressure……………………0.6mpa

Air consumption……………………0.4m3/min

5. Water supply pressure

Water supply pressure……………………0.2-0.3mpa

6. Power supply

Voltage……………………AC380V 10%

Frequency……………………50Hz

Wairing cable……………………Three phase four wire

Total rated power……………………50kw

Average consumption……………………26kw/h

7. Machine weight……………………5.5ton

8. Machine dimension(L×W×H)……………………3.1×2.2×2.4m

HW60R-III Specification

1. Max. volume of product……………………2.5L

2. Extrusion system

Screw diameter(outer/middle/inner)……………………60/35/35mm

Screw L/D……………………27:1/25:1/25:1

Plasticizing Capacity……………………80/10/10kg/h

Barrel heating zones……………………3/3/3

Motor power……………………18/5.5/5.5kw

3. Clamping system

Platen dimension(W×H)……………………380×450mm

Clamping force……………………80kn

Mold platen opening stroke……………………80-330mm

4. Pneumatic system

Air supply pressure……………………0.7mpa

Work pressure……………………0.6mpa

Air consumption……………………0.4m3/min

5. Water supply pressure

Water supply pressure……………………0.2-0.3mpa

6. Power supply

Voltage……………………AC380V 10%

Frequency……………………50Hz

Wairing cable……………………Three phase four wire

Total rated power……………………75kw

Average consumption……………………37kw/h

7. Machine weight……………………6.5ton

8. Machine dimension(L×W×H)……………………3.5×2.2×2.6m

HW70R-III Specification

1. Max. volume of product……………………3.5L

2. Extrusion system

Screw diameter(outer/middle/inner)……………………70/40/40mm

Screw L/D……………………27:1/25:1/25:1

Plasticizing Capacity……………………110/15/15kg/h

Barrel heating zones……………………3/3/3

Motor power……………………30/7.5/7.5kw

3. Clamping system

Platen dimension(W×H)……………………385×500mm

Clamping force……………………100kn

Mold platen opening stroke……………………250mm

4. Pneumatic system

Air supply pressure……………………0.7mpa

Work pressure……………………0.6mpa

Air consumption……………………0.4m3/min

5. Water supply pressure

Water supply pressure……………………0.2-0.3mpa

6. Power supply

Voltage……………………AC380V 10%

Frequency……………………50Hz

Wairing cable……………………Three phase four wire

Total rated power……………………95kw

Average consumption……………………50kw/h

7. Machine weight……………………8ton

8. Machine dimension(L×W×H)……………………3.5×2.2×2.8m

     Note: The data in list is just for reference.