HFB82PC PC Special Blow Molding Machine For PC Barrel

It is the foremost noted series with the very best quality. it's well-known to several customers everywhere the planet for its excellence, pragmatic, classic. consistent with completely different demand, 25:1 and 30:1 extrusion systems and large die head square measure for selection. Clamping system adopts two-tie-bar kind clamping device with gears and racks synchronously aligned; Cylinder clamps mildew by direct pressure; It adopts one-piece mildew platen with X-shaped pull arms to extend the bearing rigidity of mildew platen; The bevel angle of pull arms is 45°, that makes an outsized mildew area; The extrusion system adopts frequency management of motor speed, and therefore the quantity of extrusion is large; It adopts PLC programmable controller created by Panasonic of Japan, of that prorams square measure optimized; All electrical equipments adopt world-famous product.

Machine Features:

It is specially designed for the production of PC pure water bucket. It can also produce various hollow blow molding products made of PC such as lampshades, bottles, pots, cans, barrels etc.

HFB82PC Blow Molding Machine

Technical parameter

Max.volume of products)-20L

Extrusion

Screw diameter-82mm

Screw length/Dia.-25：1(

Plasticizing capacity-90 kg/h（HDPE）

Heating power-34kw

Clamping system

Max.dia. of die-80(big die head 130)mm

Heating power of die-8.7KW

Volume of accumulator)-1.5L

Clamping system

Platen dimensions(W×H)-440x600mm

Clamping force-210KN

Platen opening stroke Max.-330-780mm

Max.speed of clamping device)(idle cycle)-650PC/H

Size of mold)(W*H)-440X600mm

Thickness of mold-350－420mm

hydraulic system

Big pump-12 MPa

Hydraulic pump system

motor power of oil pump-45KW

motor power of wall thickness-4KW

Electrical power

Power voltage-AC380V

Frequency-50Hz

Connecting cable-Three phase four wire system

Total rated power-92kw