Special China Extrusion Blow Molding Machine For Panel
It is a special machine used for manufacturing merchandise with HDPE because the staple, as well as outsized plastic wall panels, door panels, ocean buoys, safety barriers for route, athletic equipment, and plastic merchandise of recreational facilities The machine is intended and made in accordance with standards of similar machine models of Federal Republic of Germany, and this machine model has the optimized performance worth quantitative relation within the world.
- Category: Special Extrusion Blow Molding Machine
Description
TB150 Special Blow Molding Machine For Panel Made in China
Machine Features:
TB150 is an accumulation and injection type extrusion blow molding machine which can produce plastic door panels and plastic desktop panels. It has reasonable structure and steady and reliable performance.
Technical Parameter)
Max.volumn of products-2100x1000x120 mm
Extrusion
Screw diameter-120mm
Screw length/dia. ratio -28:1
Rev. / min. -8~78
Plasticizing capacity-450 kg / h
Heating zone-5
Heating power-43 KW
Driving power-132 KW
Die head
Max. accumulator volume -50 L
Max. injection capacity- 5 kg / sec.
Max. mouth diameter- 600 mm
Parison controller- 100 points
Heating zone- 6
Heating power- 59.5 KW
Clamping device
mold platen dimension - 1900 x 1500 mm
Stroke of mold platen-650~1650 mm
max. speed of clamping close - 350 mm / sec.
max. speed of clamping open - 230 mm / sec.
Clamping force-1500 KN
Robot
Gripper stroke - 700 mm
Pickup travel stroke- 2000 mm
Frame
Lifting stroke-500 mm
Lifting speed-36 mm / min.
Hydraulic system
Pressure hydraulic pump -16 MPa
Single pump displacement - 116 ml / r.
Varies pump displacement - 94+23 ml / r.
Hydraulic pump motor power - 30x2
Parison servo control system
Rated pressure-14 MPa
Rated flow- 53 L / min.
Hydraulic pump motor-15 KW
Pneumatic system
Air pressure-0.7 MPa
Working pressure -0.6 MPa
Air consumption - 1.5 M3 / min.
Water supply
Water supply pressure-0.3 MPa
Electrical power
Power voltage-AC380V±10%
Frequency- 50HZ
Wires- three phase four wires
Total rated power- 315 KW
Average consumption - 160 KW/ h
Weight of the machine- 50 ton.
Machine outline dimension L x W x H m-11 x 4.3 x 6.7
Max. mold dimension LxW - 2500x1300 mm
