Automatic Extrusion Blow Molding Machine for Car fuel tank
This machine consists by six sets of extruder system, six layer die head system, platen-moving system, hydraulic pressure, gas system,electric system, automatic do away with system and then on. This machine will assemble with centre automotive vehicle loading system, cooling unit, crusher, mixer, etc. This machine fully designed and made in keeping with German standards of a similar model, that is that the model with optimized ration of performance to cost at the present within the world. Machine features: This machine is specially developed for 6 layer fuel tank up to 100L.
- Category: Special Extrusion Blow Molding Machine
Description
Automatic Blow Molding Machine Special Machine for Car fuel tank
HX1000X6－Y
Technical Parameter
1. Max. volume of the fuel tank----------------100 L
2. Number of layer -------------------------6
3. Extruder system
Inner layer and regrind layer
Plasticizing capacity ( kg / h ) ------------------------270x2 (HDPE)
Heating power of cylinder ( KW )-----------------------35.6x2
Heating power of extruder ( KW )----------------------90x2
Plasticizing capacity ( kg / h ) -----------20( HDPE )
Barrier layer
Plasticizing capacity ( kg / h ) --------------20 ( HDPE )
Heating power of cylinder ( KW ) ------------------7.5
Heating power of extruder ( KW ) --------------15
Out layer
Plasticizing capacity ( kg / h ) ----------------------65 ( HDPE )
Heating power of cylinder ( KW ) ----------------------------------21.5
Heating power of extruder ( KW ) -----------------------------------37
4．The co-extrusion die head of six layer
Mold head heating power ( KW ) -------------------------75
Mold head heating sections -----------------------12
Mouth die diameter ( mm ) --------------------------300-600
Parison control point number----------------------------------100
5. Clamping device
Mold plate dimension (W*H)( mm ) -----------------1400 x 1800
Distance between mold plates ( mm )--------------------------650~1650
Clamping force ( KN ) ---------------------------------1000
Moving-mold stroke (mm) ------------------------------1000
Moving-mold speed(mm/sec.) ----------------------250
6. Power consumption
General assembly power（KW）-----------------566
Average energy consumption（KW/h）------------------------340
Air supply pressure（MPa）-----------------------------------------------1.0
Air consumption（M3/min）---------------------------------------3
Cooling water pressure（MPa）----------------------------------0.3
Cooling water flow（M3/min）------------------------------50(<300C)
7. Weight ( ton. ) --------------------------------About 100
8. Machine dimensions(L*W*H)（长x 宽 x 高 ）( m ) --------------16 x 9.5x 8
