Issues requiring special attention during use of the pneumatic system include:
1) Keep the compressed air clean, check the cleanliness of the air filter frequently in production, and replace the filter element of the filter regularly.
2) Fill compressors with special lubricants regularly according to the requirements of the equipment instruction manual, and clean the equipment regularly.
3) Regularly evacuate the water of the air compression system, and regularly check whether the drainage of the automatic drain is normal, especially in wet weather conditions, it is necessary to strengthen the inspection.
4) Regularly check the pneumatic components such as air valve and cylinder, especially the exhaust muffler should be regularly checked to prevent the safety accident caused by the failure of the valve operation due to the poor exhaust of the exhaust muffler.
5) Fill the lubricator of the pneumatic system with appropriate lubricating oil on a regular basis to prevent malfunctions or accelerated wear of the valves and cylinders.
6) The faulty pneumatic components should be replaced or repaired in time to prevent safety accidents caused by the malfunction of the pneumatic components.
7) Determine the blowing pressure and parameters of the pneumatic system according to the technological requirements of the blow molded product. For example, the determination of low-pressure blowing pressure and high-pressure blowing pressure needs to be determined according to the requirements of various blown products.