Issues that require special attention in the use of pneumatic systems include:
1) Keep the compressed air clean. Always check the cleanliness of the air filter during production, and replace the filter element of the filter regularly.
2) Regularly fill the compressor with special lubricant for the compressor according to the requirements of the equipment instruction manual, and do the cleaning work of the equipment regularly.
3) Regularly drain the water from the air compression system and regularly check whether the drainage of the automatic drain is normal, especially under humid weather conditions.
4) Regular inspection of pneumatic components such as air valves, cylinders, etc., especially the exhaust muffler, to prevent safety accidents caused by malfunction of the gas valve caused by poor exhaust of the exhaust muffler.
5) Regularly fill the lubricator of the pneumatic system with suitable lubricant to prevent the valve or cylinder from malfunctioning or accelerating wear.
6) The faulty pneumatic components should be replaced or repaired in time to prevent safety accidents caused by their failure.
7) Determine the blowing pressure and parameters of the pneumatic system according to the process requirements of the blow molded product. For example, the determination of low-pressure air pressure and high-pressure air pressure needs to be determined according to the requirements of various blow molding products.