How do you stop the work of Chinese blow molding machine?

Zhangjiagang Kingplas is the Chinese Extrusion Blow Moulding Machine Factory over 10 years.

How can we stop the work of Chinese extrusion blow molding machine? shut the feeding system and shut the hopper blanking baffle. Drain the fabric within the cylinder and switch off the machine when evacuation the fabric. shut the auxiliary machines. close up the heater, cooling pump and grease pump, and at last interrupt the full power provide. shut all recess valves.
Choose the operation mode to the manual position to stop the misoperation of the total cycle and make sure the safety of the person and instrumentation. shut the feed gate and stop feeding to the barrel. The injection seat is came back to permit the nozzle to detached from the mould. Removal of excess material from the barrel by perennial injection and pre-molding till the fabric now not seems from the nozzle flow. At this time, the screw speed ought to be reduced and therefore the idle time mustn't be too long. place all the operation switches and buttons within the open position, power off and water cut.
The advantage of pre-blowing method before processing is that the start-up operation of ballroom dancing extrusion blow molding machine is operated, the preheating temperature is ready on the temperature controller consistent with the method needs, the heating plant is began to heat up, and therefore the current indication price of every section of the heater is checked whether or not traditional, till the process temperature is reached, the constant temperature l-2h.