A wide range of hollow extrusion blow molding machines, we must pay attention to choose the right model when we use. The position and distance of the lamps in the heating zone can be adjusted according to the different shapes and sizes of the preforms in order to adjust the position and distance of the reflectors in different heating zones for optimum heating.
The hollow blow molding machine uses a constant pressure thermostat to control the infrared lamp to heat the preform, ensuring that the embryo is properly heated, accurate and stable, independent of input voltage changes.
The hollow blow molding machine can be combined with double-cavity double-extension cylinder, three-chamber three-cylinder, four-chamber four-cylinder or six-cylinder six-cylinder cylinder according to the needs of different products. The function can be adjusted separately to adjust the machine using single-chamber single-drawing cylinder. Or try different needs of the mold.
A control system with automatic alarm barrier function; when an operation error or failure occurs, the computer will display and issue an alarm.
The hollow blow molding machine mold is convenient and convenient to replace, and it is not necessary to adjust the mold thickness within the mold capacity range of the corresponding machine.
The blow molding machine blows 30 ml - 5 liters of cold, hot filled plastic bottles or other plastic containers.
The production process is fully automated, and multiple machines can be combined into an automated production line. The entire production process does not require manual contact with preforms or finished bottles.